Throughout the hot summer time days, the ice maker is our best pal in the kitchen. But what if your ice maker abruptly stops generating any ice, what are you to do? Effectively, my buddy, you are in luck, mainly because this report will help you know the explanation why and what are the required measures to execute in order to resolve the issue.
So, why is your ice maker not making any ice?
1. Energy connection
Prior to anything else, verify no matter whether your machine is connected to the power outlet, if it is, verify if the energy outlet is functioning properly and is transmitting electric present. Then turn on your ice maker to check if it is okay or not. The wire along the proper side of the machine should be lowered as far as it goes. If this is in a raised position, your machine is off and it will not make any ice.
two. Appropriate freezer temperature
If the icemaker wire is positioned properly and is turned on, proceed to check the freezer temperature. The temperature must be within the variety of to eight degrees Fahrenheit. If it’s above ten to 12 degrees, your machine will not make ice.
For a newly installed icemaker, you will need up to 24 hours to let the machine function and cool down. A newly installed icemaker could not operate until the ice mold temperature has dropped to about 15F – 16F degrees. If you have just added a water line to the refrigerator, it might take up to about an hour and a half for the machine to start out operating. Also, a newly installed water line may have air in the line. It can sometimes take a few ice generating cycles to clear the line of air.
three. Check water supply
Okay, in order to make ice, you need to have water. So make confident that there is water flowing to the ice maker. Check for kinks in the tubing and look out for frozen particles stuck inside the water tube. Also make Daewoo Service Center Dubai that the household water provide is turned on. Often the water inlet valve can go poor. If there is water in the ice maker, but it is not freezing, use a freezer thermometer to confirm that the temperature is cold adequate for it to freeze.
4. Check copper supply
Make sure the copper provide line to the refrigerator is turned on beneath the sink, or coming from the basement.
Immediately after checking all the above pointed out components and specific that the freezer is cold enough but it is nonetheless not generating any ice, check and really feel the bottom of the ice maker unit. This spot is normally cold for an ice maker running smoothly. But if it is hot or warm, it is probable that the small heating element inside is stuck or damaged. Dawoo Service Center when turned on melts the bottom of the cubes so that they can be released and harvested by the ejector blades. In this case, you will have to replace this part in order to make your ice maker work smoothly again.